Avtech AVR-A-1-S2-C, Инструкция по эксплуатации

Страница: 17 / 31

REAR PANEL CONTROLS
1. AC POWER INPUT . An IEC-320 C14 three-pronged recessed male socket is
provided on the back panel for AC power connection to the instrument. One end of
the detachable power cord that is supplied with the instrument plugs into this socket.
2. AC FUSE DRAWER . The two fuses that protect the AC input are located in this
drawer. Please see the “FUSES” section of this manual for more information.
3. DC FUSES . These two fuses protect the internal DC power supplies. Please see the
“FUSES” sections of this manual for more information.
4. OS INPUT CONNECTOR . (Present on units with -OS option only.) A DC offset in
the range of ±50V (250 mA max) may be applied to this solder terminal. The DC
offset will appear on the output. When this feature is not used, the OS input should
be connected to ground (using the adjacent GND connector). This is especially
important when driving loads containing a diode.
5. GND CONNECTOR . (Present on units with -OS option only.) This solder terminal is
connected to ground. It may be used to ground the OS input connector.
6. AMP SWITCH & INPUT . (Present on units with -EA option only.) To control the
output amplitude with an external voltage, set the rear-panel switch to the “EXT”
position and apply 0 to +10V to the adjacent connector (R
IN
≥ 10kΩ).
17
OS GND
INT EXT A
AMP
2
3 1
5
4
6