event. This output may be used to trigger oscilloscopes or other equipment.
5)
Delay Controls
. When the PRF Range Switch is set to one of the four internal
oscillator ranges, the main output is advanced or delayed relative to the TRIG
output pulse (item 4). The delay is variable up to 200 ns, approximately, using the
DELAY and DELAY FINE dials.
6)
Advance/Delay Switch
. When the PRF Range Switch is set to one of the four
internal oscillator ranges, this switch determines whether the TRIG output precedes
the main output (ADVANCE mode), or whether the TRIG output occurs after the
main output (DELAY mode).
7)
Pulse Width Control
. This dial controls the pulse width.
8)
Amplitude Control
. This dial controls the amplitude.
9)
OUT Connector
. This SMA connector provides the main output. This output
requires
a 50
Ω
load to function properly.
Caution: Voltages as high as ±200V may be present on the center conductor of
this output connector. Avoid touching this conductor. Connect to this connector
using standard coaxial cable, to ensure that the center conductor is not exposed.
16
Содержание AVR-A-1-S2-C
Страница 31: ...PERFORMANCE CHECKSHEET 31...
