Avtech AVR-A-1-S2-C, Инструкция по эксплуатации

Страница: 19 / 31

When the ADVANCE/DELAY switch is set to the DELAY mode, the TRIG output lags
the main output. These pulses are illustrated below:
When triggered externally, the TRIG connector acts as an input. The delay controls do
not function in this mode. This is illustrated below:
AMPLITUDE DYNAMIC RANGE
Avtech high-speed pulse generators are optimized to operate near their maximum rated
amplitude. Generally, operation below 20% of the maximum rated amplitude is not
recommended. To generate pulses below this level, the pulse generator should be
operated near its maximum rated amplitude, and one or more coaxial attenuators
should be connected to the output.
19
TRIG
(generated by the
internal oscillator)
200 ns, FIXED
MAIN OUTPUT
PULSE WIDTH DELAY
AMPLITUDE,
VARIABLE
2V, FIXED
MAIN OUTPUT
PULSE WIDTH
AMPLITUDE,
VARIABLE
> 50 ns
TTL LEVELS
(0V and 3V-5V)
TRIG
(external input)
PROPAGATION DELAY (FIXED)
TRIG
(generated by the
internal oscillator)
200 ns, FIXED
MAIN OUTPUT
PULSE WIDTH
DELAY
AMPLITUDE,
VARIABLE
2V, FIXED