SPECIFICATIONS
Model:
AVR-A-1-S2-C
1
Amplitude
3,4,5
: (50 Ohm load)
0 to 200 Volts
Pulse width
3,5
:
10 ns to 200 ns
PRF:
0 to 10 kHz
Rise and fall time:
≤ 2 ns
Maximum duty cycle:
0.2%
Maximum avg. output power:
1.6 Watts
Polarity
6
:
Positive or negative or both (specify)
Front-panel controls:
Decade range switches & one-turn dials for PRF, pulse width & delay; one-turn dial for
amplitude.
Propagation delay:
30 ns (Ext trig in to pulse out)
Jitter:
± 100 ps ± 0.03% of sync delay, Ext trig in to pulse out
DC offset or bias insertion:
Option available. Apply required DC offset or bias in the range of ± 50 Volts,
(250 mA max) to back panel solder terminal. See note 7.
Trigger required:
External trigger mode: +5 Volts, 50 ns to 5 us (TTL)
Variable sync delay:
0 to ± 200 ns (Sync out to pulse out)
Sync output:
+3 Volts, 200 ns, will drive 50 Ohm loads
Connectors:
Out, Trig / Sync: BNC
Dimensions (H x W x D):
100 mm x 430 mm x 375 mm (3.9” x 17” x 14.8”)
Power requirements:
100 - 240 Volts, 50 - 60 Hz
Chassis material:
Cast aluminum frame & handles, blue vinyl on aluminum cover plates
Mounting:
Any
Temperature range:
+5°C to +40°C
1)
-C suffix indicates stand-alone lab instrument with internal clock and line powering. No suffix indicates miniature module requiring DC power and
external trigger. (See
http://www.avtechpulse.com/formats
for details of the four basic instrument formats).
2)
-B suffix indicates IEEE-488.2 GPIB and RS-232 control of amplitude, pulse width, PRF and delay (See
http://www.avtechpulse.com/gpib
).
3) For analog electronic control (0 to +10V) of the amplitude, suffix model number with -EA. Electronic control units also include standard front-panel
controls.
4) For operation at amplitudes of less than 20% of full-scale, best results will be obtained by setting the amplitude near full-scale and using external
attenuators on the output.
5) For 10-turn dial control of pulse width (or amplitude) suffix model number with -PWT (or -AT). For -C units only.
6) Indicate desired polarity by suffixing model No. by -P or -N (i.e. positive or negative) or -PN for dual polarity option. Polarity reversal is achieved by
means of a two-position switch on -C units and by keypad control on -B units.
7) For DC offset option suffix model number with -OS.
7
Содержание AVR-A-1-S2-C
Страница 31: ...PERFORMANCE CHECKSHEET 31...
