VIDEO VIEWER MISCELLANEOUS CONTROL PANEL
-21-
Trigger
Click “
” (Miscellaneous Control)
→
“
” (Server Setting)
→
“General”
→
“Trigger” to enter this page.
Alarm Trigger (Only for AVI202 / 203 / 212):
In this section, you can select to enable the function of alarm trigger.
Motion Trigger:
Item Description
Motion
In this section, you can select to enable the function of motion trigger.
Duration
Set the duration time of the motion trigger recording (5 / 10 / 20 / 40 seconds).
Select to enable the function of motion trigger. And then click “Setting” to set the motion detection area.
Function Description
Sensitivity
Set the detection sensitivity:
For AVI201 / 202 / 212 - 0 ~ 9
，
the higher the number, the lower the sensitivity.
For AVI203 - Low / Normal / High.
Motion Detection
Setting Area
Set the motion detection area by selecting the area grids with your mouse. Pink grids represent
the area that is not being detected while the transparent grids are the area under detection. You
can set multiple areas under detection.
Select All
Click “
＋
” (Select All) to set the whole area under detection.
Clear All
Click “
－
” (Clear All) to set the whole area undetected.
