19
3.5 Record (For selected models only)
3.5.1 Record
Enable or disable the record function. When “Enable” is set to “No”, the record function is disabled even if
you enable it in other configuration pages.
Select if the data should be overwritten when the memory storage is full.
Enable or disable the audio record function.
Note:
Audio recording is available only for selected models.
Select the video resolution for event recording.
Note:
The higher resolution you choose, the more accuracy and higher image quality the recording will
be, but the faster the memory storage is consumed and become full.
3.5.2 Record Timer
To schedule manual and motion recording, enable it, and select the day and time for recording.
Note:
The timer must be enabled for the record function to work properly.
Note:
The selected time will be yellow-colored.
3.6 Storage (For selected models only)
3.6.1 Memory
In “Memory”, you can check the remaining capacity for recording, or clear all recorded data saved if needed.
Note:
The recorded data will be removed also when you reset or reboot this camera.
Note:
To save more recorded data, it’s recommended to use this camera with the compatible NVR.
Note:
To know the total recording time per recording resolution, please refer to “APPENDIX 6
RECORDING TIME TABLE” at page 38.
Содержание 4713218633538
Страница 42: ...37 Step2 Click Sign in Security Step3 Roll down to the bottom of the page and check the Allow less secure apps...
Страница 46: ...41 Step3 Choose the account you want to share with and click Share to save...
Страница 48: ...43 A8 3 2 From Android Mobile Device In the address book switch Guard from OFF to ON...
