Avtech 4713218633538, Руководство по эксплуатации

Страница: 20 / 59

15
To use this function, make sure:

A PC is installed in the same LAN environment as this camera, and you know the IP address of the PC.

A PC account is created as “Administrator” with a user name and password.

A folder in the PC is opened as shared to the user account you assigned.
Note: Please check “APPENDIX 7 PREREQUISITES FOR NETWORK SHARE” at page 39 for more details.
Enable this function, and enter the address of the PC, the folder being shared, and the user name and password
to access the PC. If the information is all correct, you'll see a check in the “Status” column, and you’re ready to
go to “Trigger”
→
“Snapshot” for further configurations.
3.2.14 Network Failure Detection
Configure this camera to check the network connection of other device periodically, and send notifications via
Email or FTP for disconnection events.
3.3 Camera
3.3.1 Camera
In this menu, you can set the camera title, OSD display, and location to save snapshots.
Note: Zoom Ratio Display is available only for selected models.
3.3.2 Video
You can adjust the power line frequency of your camera (60Hz or 50Hz) to suit your environment if needed, or
adjust video-related settings in different video format.

“Quality” is related to image clearness.

“FPS” is related to the fluency of the video. The more the FPS, the more fluent the video.

“Max Bit Rate” is the maximum limitation of data transmission in the selected image format and resolution.