AVTECH ELECTROSYSTEMS AVRQ-4-B, Инструкция по эксплуатации

Страница: 57 / 75

d) Press CHANGE to return to the main menu.
5. To set the rise time to 100 ns:
a) Press the MOVE button until the arrow pointer is pointing at the rise time menu
item.
b) Press the CHANGE button. The rise time submenu will appear. Rotate the
ADJUST knob until the rise time is set at 100 ns.
c) Press CHANGE to return to the main menu.
6. To set the HV PULSE amplitude to +1.5 kV:
a) Press the MOVE button until the arrow pointer is pointing at the AMP1 menu
item.
b) Press the CHANGE button. The submenu will appear. Rotate the ADJUST
knob until the amplitude is set at +1.5 kV.
c) Press CHANGE to return to the main menu.
7. To set the VCC2 amplitude to +5V:
a) Press the MOVE button until the arrow pointer is pointing at the AMP2 menu
item.
b) Press the CHANGE button. The submenu will appear. Rotate the ADJUST
knob until the amplitude is set at +5V.
c) Press CHANGE to return to the main menu.
8. At this point, nothing should appear on the oscilloscope.
9. To enable the output:
a) Press the MOVE button until the arrow pointer is pointing at the output menu
item.
b) Press the CHANGE button. The output submenu will appear.
c) Press MOVE until the arrow pointer is pointing at the “ON” choice.
d) Observe the oscilloscope. You should see +1.5 kV pulses with 100 ns rise time,
approximately.
e) Press CHANGE to return to the main menu.
57