Avonic AV-CAP100, Руководство пользователя

Страница: 13 / 26

Unpacking the Controller
Execute the following steps to unpack the CAP100 and associated components:
1. Open the box.
2. Verify that the contents of the box exactly matches the items as described in Package Contents on page 12.
If this is NOT the case, contact Avonic and stop here.
The CAP100 should be in its protective foam as follows:
Figure 4: Controller in Foam
3. Verify that the plastic bag is sealed. If this is NOT the case, contact Avonic and stop here.
4. Break the seal of the sealed bag.
5. Take the CAP100 out of the bag.
6. Install the CAP100 following the steps as described in the chapter INSTALLATION on page 14
Return Procedure
If, for any reason, you have to return the camera to Avonic, Execute the following steps:
1. Place the CAP100 back in the box.
2. Place the CAP100 with all of its components in the box.
3. Verify that the contents of the box exactly matches the items as described in Package Contents .
4. Contact Avonic for the Return Procedure.
13