AVOCOR VTF-6500, Руководство по установке и эксплуатации

Страница: 52 / 79

49
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution
Image appears
“washed out”
and / or dark areas app ear
too bright.
• Brightness is set too high. • Decrease the brightness setting.
Image is too dark.
• Brightness and /or Backlight are
set too low.
• Increase the brightness and /
or backlight settings.
Images from an HDMI source do
not display.
• The resolution and frequency of
the video card in the computer
are not compatible with the
display.
• HDMI cable from source to
display is either defective or too
long.
• Select a compatible resolution
and vertical frequency (refer
to Supported Timings on page 62).
• Try a known-good and /or
shorter HDMI cable.
Computer images do not
display correctly.
• The resolution and frequency of
the video card in the computer
are not compatible with the
display.
• Clock and Phase settings nee d
adjustment.
• Select a compatible resolution
and vertical frequency (refer
to Supported Timings on page 62).
• Adjust Clocks and Phase settings
(refer to Phase - VGA sources on
page 45 and Clock
- VGA sources on page 45).
Touch screen
doesn’t
work.
• Multi-touch controller host
computer is not connected
correctly.
• Host computer hardware or OS
incompatibility.
• See Figure 3-7.
• Refer to Enabling the Touch
Screen on page 30.
Should you require assistance with a suspected hardware fault, please contact the support line below. You will require
your unit serial number. The operator will attempt to diagnose any fault and will take action as appropriate.
UK Warranty Support
Tel. 01276 804 654
service@avocor.co.uk