AVOCOR VTF-6500, Руководство по установке и эксплуатации

Страница: 4 / 79

4

Don't insert the power plug into an outlet other than 100~240V AC.

This may cause fire or electrical shock.
 Don’t use a damaged power plug or worn outlet.
 Don’t insert an improper power plug it may cause fire or electric shock.

Don't place the display on an unstable shelf or surface.

The display may fall, causing injury. Please install on a horizontal, stable, level surface.

Don't place objects on the display.

If the display is covered or the vents are blocked, the display could overheat and cause a fire.

If metal or liquid gets into the display, it may cause fire or electrical shock.

Do not put heavy objects on the display as they may fall, causing injury.

Please keep a 10 cm minimum distance between the display and the wall for sufficient ventilation.

Don't move the display when it is connected to the power cord and AV cables.

When moving the display, make sure to remove the power plug and cables from the outlet or source.

When unpacking or carrying the display, at least 2 people are needed. Make sure the display is
carried upright.

Transport the display upright. Avoid placing the display face up or down.
Use

Handle the display gently. Do not drop.

If you encounter a problem during installation, please
contact your dealer for assistance. Don’t repair or
open the display by yourself.

Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.

Protect and correctly use the power cord/plug.

Don't pinch the power cord/plug between hard surfaces.

Don't step on the power cord/plug.

Before inserting the power plug into the wall outlet, connect the power cord to the display.

Don't operate the display with a damaged power cord or it may damage the display.

Using extension cords (not recommended)

If an extension cord must be used, ensure the voltage rating exceeds the max power consumption of the
display. If the voltage rating is less than the display, it will cause the extension cord to overheat.

If there is thunder or lig
htning, don’t touch the display or the power plug.

This may cause an electric shock.

Don’t use any kind of liquid on the display.

If liquid is spilled on the display, remove the power and ask qualified service personnel to
check the display.

If the liqu
id gets on the display’s screen, please clean it with a dry and soft cloth immediately.
 Don’t use any harsh chemical on the display.