AVOCOR VTF-6500, Руководство по установке и эксплуатации

Страница: 27 / 79

24
Mounting the Display
You can mount the display on a wall.
If you do decide to wall-mount the display, ensure that the wall-mount bracket is installed according to the instructions
included with it. The wall must be capable of supporting a redundant weight factor three (3) times the weight of the
display, or be reinforced.
We recommend that this be done by a custom installation specialist.
NOTE
Use only the approved wall-mount kit designed for your display.
Connections to the Display
Proceed as follows to connect the display to your video sources, external controller(s)
– if present – and AC
power. When connecting your equipment:
•
Turn off all equipment before making any connections.
•
Use the correct signal cables for each source.
•
For best performance and to minimise cable clutter, use high-quality cables that are only as long as
necessary to connect two devices. (Don't use a 7m cable when a 1.8m cable will suffice.)
•
Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.