AVOCOR VTF-6500, Руководство по установке и эксплуатации

Страница: 39 / 79

36
Start Up Logo
On or Off
Advanced
Settings
Auto Adjustment (Video
Mode)
Off or On
Image Position (Video
Mode)
Up, Dow n, Left, Right
-50, ... 0, ...50
Phase (Video Mode) 0, 1, 2 ... 63
Clock (Video Mode) 0, 1, 2 ... 100
USB Touch Mode
Auto, USB Touch 1,
USB Touch 2, PC
IRFM
Off or On
Baud Rate
115200 , 38400, 19200 or 9600
Smart Light Control Off , DCR or Light Sensor
Wake Up from Sleep
VGA Only / VGA, Digital,
RS232 / Never Sleep
Ethernet Setup
Enable network No or Yes
Dynamic IP Disable or Enable
Static IP 255.255.255.255 (0.0.0.0)
Subnet Mask 255.255.255.255 (0.0.0.0)
Gateway 255.255.255.255 (0.0.0.0)
DNS Address 255.255.255.255 (0.0.0.0)
Save Network Settings No or Yes
Refresh Refreshes dynamic IP information
Power Status Alert No or Yes
Source Status Alert No or Yes
Signal Status Alert No or Yes
Load Default Loads default network settings
Device MAC Displays MAC information
Factory Reset Yes or No
System
Channel Information Main Active Source / Signal Resolution /
Refresh Rate / PC Power Status
Firmware Version
Information of the firmware version
SN Information of the serial number
NOTE Default settings appear in bold type.
Figure 4-1. OSD Menu Structure