AVOCOR AVF-7550, Инструкция по установке и эксплуатации

Страница: 42 / 77

Revision Date: 2018/07/25 42
VGA Phase
Adjust the phase of the displayed signal (VGA source only). Press
ƒ
or
„
to
select the desired level, and then press OK.
Range: 0~100
VGA Clock
Adjust the clock of the displayed signal (VGA source only). Press
ƒ
or
„
to
select the desired level, and then press OK.
Range: 0~100
Audio Menu
This menu is used for adjusting volume settings.
Volume
Adjust the sound. Press
ƒ
or
„
to select the desired level, and then press OK.
Range: 0~100; Default: 50
Bass
Adjust the sound in low tones (bass). Press
ƒ
or
„
to select the desired level,
and then press OK.
Range: -10~10; Default: 0
Treble
Adjust the sound in high tones (treble). Press
ƒ
or
„
to select the desired level,
and then press OK.
Range: -10~10; Default: 0
Balance
Adjust the balance of the left and right speakers. Press
ƒ
or
„
to select the
desired level, and then press OK.
Range: -10~10; Default: 0
Speaker
Turn the internal speaker on or off
Default: On
Audio Source
Select the audio source for the Main input
Options: Line-In, DisplayPort, HDMI1~4, OPS, WPS