AVOCOR AVF-7550 Скачать руководство пользователя страница 46

Страница: 46 / 77

Revision Date: 2018/07/25

Network Configuration

By default, the display will enter power saving (Sleep Mode) if no signal is received for 5 minutes. Normally, the
RS-232, DisplayPort, and HDMI inputs are inactive in Sleep Mode, to save power.

This menu configures the display’s RS232 and Ethernet communication ports.

UART Baudrate

Select the baud rate of the display’s RS232 port

Options:

115200, 38400, 19200, 9600;

Default:

115200

Network

Enable the display’s built-in Ethernet port

Options:

No, Yes;

Default:

IP Address

Enable Dynamic IP mode or set the static IP address of the display’s Ethernet port

Default:

0.0.0.0

Netmask

Set the subnet mask address.

Default:

0.0.0.0

Gateway

Set the Gateway mask address.

Default:

0.0.0.0

DNS

Set the DNS mask address.

Default:

0.0.0.0

Save Settings

Save the network settings and apply to device.

Refresh

Refresh dynamic IP information.

Power Status Alert

Enable an automatic alert when the display is powered down

Options:

On, Off;

Default:

Off

Source Status Alert

Enable an automatic alert when the source is changed

Options:

On, Off;

Default:

Off

Содержание AVF-7550














































































Результаты поиска

Содержание AVF-7550

Отзывы:

AVOCOR AVF-7550, Инструкция по установке и эксплуатации, Страница: 46 / 77

Результаты поиска

Содержание AVF-7550

Отзывы: