AVOCOR AVF-7550, Инструкция по установке и эксплуатации

Страница: 4 / 77

Revision Date: 2018/07/25 4
Installation
Ÿ
Don't install in a high-temperature environment.
Ÿ
If the display is used in high-temperature or in direct sunlight, it may cause the case or other parts to
become distorted or damaged, resulting in overheating or electrical shock.
Ÿ
Don't install in a high-humidity environment.
Ÿ
This may cause overheating or electrical shock.
Ÿ
Don't install near any heat sources such as radiators, heat registers, stoves, or other apparatus that
produce heat.
Ÿ
This may cause fire or electrical shock.
Ÿ
Don't overload outlets or cables beyond electrical capacity.
Ÿ
Don't use extension cords as it may cause fire or electrical shock.
Ÿ
Don't insert the power plug into an outlet other than 100~240V AC.
Ÿ
This may cause fire or electrical shock.
u
Don’t use a damaged power plug or worn outlet.
u
Don’t insert an improper power plug it may cause fire or electric shock.
Ÿ
Don't place the display on an unstable shelf or surface.
Ÿ
The display may fall, causing injury. Please install on a horizontal, stable, level surface.
Ÿ
Don't place objects on the display.
u
If the display is covered or the vents are blocked, the display could overheat and cause a fire.
u
If metal or liquid gets into the display, it may cause fire or electrical shock.
u
Do not put heavy objects on the display as they may fall, causing injury.
u
Please keep a 10 cm minimum distance between the display and the wall for sufficient
ventilation.
Ÿ
Don't move the display when it is connected to the power cord and AV cables.
u
When moving the display, make sure to remove the power plug and cables from the outlet or
source.
u
When unpacking or carrying the display, at least 2 people are needed. Make sure the display
is carried upright.
u
Transport the display upright. Avoid placing the display face up or down.
u
Handle the display gently. Do not drop.