AVOCOR AVF-7550, Инструкция по установке и эксплуатации, Страница: 44 / 77

Revision Date: 2018/07/25 44
Advanced Settings
This menu is used to make advanced settings.
Smart Light Control
Enable dynamic contrast (DCR) or ambient light sensor
Options: Off, DCR, By Time; Default: Off
IRFM
Create slight frame motion to help avoid image retention
Options: On, Off; Default: Off
Noise Reduction
Reduce random noise in the video content
Options: Off, Low, Medium, High; Default: Off
Wake Up From Sleep
Options: VGA Only, Digital, RS232, Ethernet; Never Sleep
Default: VGA Only
EDID Switch
Select EDID (Extended Display Identification Data) of the HDMI 1~4, OPS, and
WPS inputs. Options: 1080p, 4K2K@30, 4K2K@60; Default: 4K2K@60
Note: Use the 1080p setting for the broadest support of lower resolution sources.
Use 4K2K setting to support high resolution sources such as 3840x2160.
Touch Input Mapping
Select one of the touch connections or choose auto detection.
Options: Auto, WPS, HDMI3~4, OPS, Rear USB; Default: Auto
Network Configuration
Configures the network settings.
Software Update(USB)
Plug in the USB flash drive and select Yes to proceed with firmware update.
To start updating firmware, select Yes to continue.
Options: No, Yes; Default: Yes
Factory Reset
Restore all settings to their default value.
Options: No, Yes; Default: No