Avocent SPC, Инструкция по установке и эксплуатации

Страница: 41 / 56

Chapter 3: Operations
35
The control screen for an SPC800/810 has two pages; the control screen for
an SPC1600/1610 has four. Each page contains information about four ports.
Page 1 contains information about ports A1 through A4 and page 2 contains
information about ports B1 through B4. For an SPC1600/1610, page 3 contains
information about ports C1 through C4 and page 4 contains information about
ports D1 through D4.
The Show command accesses the control screen from the command line. Use
the Arrow keys on your keyboard to move the cursor from field to field. The
help line at the bottom of the screen displays key commands that, when typed
on your keyboard, perform specific operations. The following chart describes
these keys.
Control Screen Help Line
Key Action
C )mnd Pressing C activates the SPC command line.
E )dit Pressing E moves the cursor to the end of the current entry in
an editable fi eld. Each press of the Backspace key erases one
character. When you fi nish editing the fi eld, press Enter or Tab .
N )ext Pressing N displays the next control screen page.
P )revious Pressing P displays the previous control screen page.
Q )uit Pressing Q ends the session. This is equivalent to the Quit command
in the command line.
Space-Bar to Select Pressing the Spacebar toggles among preset values. You may
also use the Spacebar in the Control Status rows to change a
port’s state to the state of the current cursor location: On or Off.
Alternatively, you may use the
Plus ( + ) and Minus ( - ) keys on the
numeric keypad to switch among preset values.
Some fields on the control screen are display-only and cannot be changed.
Other fields may be changed by toggling among preset values or by entering
text. The following sections describe each control screen field.
Location field
The display-only Location field may contain text that was specified with the Set
Location command. The text in this field is also appended to a
Welcome to
banner that appears when a user successfully logs in.
Input Load field
The display-only Input Load field indicates the current cumulative input load
in amperes of all devices attached to the SPC. You may also obtain this value