Avocent SPC, Инструкция по установке и эксплуатации

Страница: 38 / 56

32
SPC Installer/User Guide
If you do not specify a username, you are prompted for it (Username:). If you
do not specify on or off , you are prompted for it (Specify ON or OFF:).
If you specify an invalid username, the command aborts with the message:
Name entered is NOT valid
Examples
The following command enables Show command access for the user JohnDoe:
SPC: set show johndoe on<Enter>
The following command disables Show command access for the user JaneDoe:
SPC: set show<Enter>
Username: janedoe<Enter>
Specify ON or OFF: off<Enter>
Changing a password
The Set Password command changes a username’s password. To change the
password for any user other than Admn, you do not need to know the current
password. To change the password for the Admn user, you must know the
current password.
For security, when you type a password, the characters appear as asterisks
(*) on the screen. When the command completes successfully, a confirmation
message is displayed. See Usernames and Passwords for
more information.
To change a password:
1. At the SPC: prompt, type set password , optionally followed by a username.
Press Enter .
If you do not specify a username, you are prompted for it (Username:).
If you specify an invalid username, the command aborts with the message:
Name entered is NOT valid
2. If you are changing the password for the Admn user, the Enter Current
Password: prompt appears. Type the current password and
press
Enter .
3. At the Enter New Password: prompt, type the new password and press
Enter. Passwords may contain up to 16 characters, and spaces are not
allowed. To specify no password, press Enter at the prompt.
4. At the Verify New Password: prompt, retype the new password and press
Enter . To verify no password, press Enter at the prompt.