Avocent SPC, Инструкция по установке и эксплуатации

Страница: 36 / 56

30
SPC Installer/User Guide
Displaying user information
The List User and List Users commands display information about one or
all users, respectively. When requesting information about one user, the
display includes a list of all ports the user may access, and whether the Show
command is enabled or disabled for the user. When requesting information
about all users, the display indicates whether the Show command is enabled
or disabled for each user and whether each user has been given
administrative privileges.
To request information about one user:
At the SPC: prompt, type list user , optionally followed by a username. Press Enter .
If you omit a username, you are prompted for it (Username:).
To request information about all users:
At the SPC: prompt, type list users and press Enter.
Examples
The following command displays information about the username JaneDoe:
SPC: list user janedoe<Enter>
Active Port List for Username JANEDOE Show command disabled
A1 ops_1 ops_srv
A2 ops_2 ops_srv
C2 shp_2
List Complete
The display indicates that JaneDoe may not use the Show command to access
the control screen. JaneDoe may access the following ports: A1 which has a
descriptive name of ops_1 and is in the port group named ops_srv, A2 which
has a descriptive name of ops_2 and is in the port group named ops_srv and C2
which has a descriptive name of shp_2.
The following command requests information about all users:
SPC: list users<Enter>
ADMN
Show command enabled Administrative user
GEN1 Show command enabled
GEN2 Show command enabled
JANEDOE Show command disabled
JOHNDOE Show command enabled
List Complete