22
SPC Installer/User Guide
- or -
Type
off
all
and press
Enter
.
Examples
The following command turns the sixth and eighth ports off, using the ports’
absolute names:
SPC: off port .b2 .b4<Enter>
The following command turns off the port named ops_2:
SPC: off port ops_2<Enter>
The port name was previously defined on the control screen.
The following command turns off all ports:
SPC: off port all<Enter>
Rebooting ports
The Reboot command reboots one or more ports. This operation turns the
port(s) off, delays for a period of time and then turns the port(s) on. The delay
interval is 15 seconds by default, or the minimum-off time specified on the
control screen, whichever is greater.
When the command completes, a display indicates the number of ports that
were rebooted and the ports that are locked in their current state.
If you plan to reboot a large number of ports simultaneously by specifying all
ports or a group name that is assigned to many ports, it may be beneficial to set
staggered minimum-off time values among the ports. This enables you to avoid
an excessive in-rush of current and possible circuit overload. See
Using the
Control Screen
for information about the minimum-off time.
To reboot one or more ports:
At the SPC: prompt, type
reboot
, followed by one or more port
names separated by spaces or commas, and press
Enter
.
- or -
Type
reboot
, followed by a group name, and press
Enter
.
- or -
Type
reboot
all
and press
Enter
.
Examples
The following command reboots the ports named ops_2 and shp_2:
SPC: reboot ops_2 shp_2<Enter>
Содержание SPC
