Avocent AdminWorks 1.2 User
’
s Manual
¯
July 2005
The Menu Bar
59
Rename Group
This command allows you to rename a group or sub-group.
1. Do any of the following:
Click on the desired group in the Topology Frame, then select Rename Group from
the Group Menu.
Or, in the Topology Frame, left-click on the desired group name, then right-click on it
and select Rename Group from the pop-up menu.
Or, click on the desired group once to select it, then click on it again to invoke the
edit box.
Or, select the group, then press F2 on your keyboard.
2. The group name you selected will then become editable within an edit box in the
Topology frame. Type the new name you want to assign to the group.
3. Press the <Enter> key on your keyboard to save the edited name. A notification will
appear in the Status frame (lower left of the Console window) to indicate that the group
has been successfully renamed.
Delete Group
This command allows you to delete a group or sub-group. There are three ways to delete a
group:
Click on the desired group, then select Delete Group from the Group Menu.
Right-click on the desired group, then select Delete from the pop-up menu.
Select the group you want to delete, then press the Delete key on the keyboard.
If the group you are trying to delete is not empty, then a dialog box will appear and give you a
choice as to where to move the systems currently assigned to that group. You can move them
to UnManaged Systems, or you can keep them in Managed Systems by moving them to the
root of the Organization Tree.
A dialog box will require you to click Yes to confirm the deletion.
A notification will appear in the Status frame (lower left of the Console window) to indicate that
the group has been deleted.
