AvMap EngiBOX, Руководство пользователя и инструкция по установке

Страница: 9 / 32

User and Installation Manual -
9
AvMap EngiBOX
Note: See Table 1 or 2 for the connection specification relative to your engine type.
4 Stroke Engines - Connection Diagram
LEFT RIGHT
external power positive input POWER + VPOIL
auxiliary power source for oil pressure
sensor (not used for VDO resistive sensor
of 1 wire)
external power negative input POWER - POIL oil pressure sensor input
output at external power v
(disabled)
ALARM + GND
oil temperature Ground (only if PT-100
semsor is used)
output at external power voltage - ALARM - TOIL oil temperature input
RPM positive input RPM + GND
CHT or CT Ground (only if PT-100 sensor
is used)
RPM negative input RPM - CHT / COOLT CHT or CT input
EGT PTO R + TEMP1 + TEMP2 + EGT PTO L +
EGT PTO R - TEMP1 - TEMP2 - EGT PTO L -
EGT MAG R + TEMP3 + TEMP4 + EGT MAG L +
EGT MAG R - TEMP3 - TEMP4 - EGT MAG L -
Note: See the compatible sensor table for each parameter at page 8.
Figure 5
Table 1
Connection board
EngiBOX has several sensor input ports, which can be occupied variably according to the connected
engine type. On the back of the EngiBOX there are several connections, see Figure 5.