AvMap EngiBOX, Руководство пользователя и инструкция по установке

Страница: 13 / 32

User and Installation Manual -
13
AvMap EngiBOX
5. Bluetooth Test
Next step is the Bluetooth test. For this test you need your Smartphone/Tablet (with Bluetooth 4.0),
where you have already downloaded the EngiBOX app (that you can get for free from the App Store).
•
Choose Skip or OK and press the knob to confirm.
•
Activate the Bluetooth on your Smartphone / tablet.
•
Launch the EngiBOX app. The app will scan for EngiBOX in the surroundings and the
list of found devices will appear in the left column.
•
Select your EngiBOX according to the EngiBOX ID.
Note : Follow instructions reported in paragraph 5.4 to read the EngiBOX ID.
•
Follow the wizard to register your EngiBOX (needed just the first time).
•
Power off the unit.
3.2 First Use
The first time you power on the EngiBOX after the initialization, you need to enter all
the settings.
1. Language:
•
Rotate the knob to choose the desired language.
•
Press the knob to tick the checkbox.
•
Press the knob to confirm and proceed.
2. Units:
Set the desired unit of measure for pressure (Bar, Kg/cm2, Psi), manifold pressure (Hpa,
inHg) and temperature (C°, F°).
•
Press the knob to open the controller.
•
Rotate the knob to choose the desired unit of measure.
•
Press the knob again to confirm and proceed.
3. Date and time (UTC):
•
Rotate the knob to select month, day, year, hours, minutes and seconds.
•
Press the knob to open the controller.
•
Rotate the knob to choose the value.
•
Press the knob again to close the controller.
•
Finally, press the knob to confirm and proceed.
4. Warning page:
•
Read the warning.
•
Select OK and press the knob to confirm and proceed.
•
EngiBOX is ready to be used.