Rug Loom User’s Manual
Loom Assembly
Worm Drive
Page | 43
Figure 29 - Sliding bracket
4)
Note that the worm lays atop the large drive gear. Move the worm
down until the two gears mesh.
Note:
You may need to pull out on the small spring pin you see at the front of the
bracket. Withdraw it enough to free the slide plate so that you can move the
worm down. Once done, release the pin into its hole.
5)
Now thread the star handle into place. This handle will allow you
to lock the worm up and away from the gear if you need to
disengage the drive. The pull pin will keep the gears seated when
the mechanism is under strain, however, you should also keep the
star handle firmly tightened when you are weaving.
6)
Connect the Cloth Storage Crank to the front of the drive shaft.
Crankshaft with
worm gear
Star handle
Pin
Содержание Rug Loom
