AVL Looms Rug Loom, Руководство пользователя

Страница: 16 / 118

Loom Assembly Rug Loom User’s Manual
Page | 12 Before You Begin
B
EFORE
Y
OU
B
EGIN
Putting together your new loom may look intimidating at first, but this
manual is designed to guide you through the process with clear steps,
pictures, and diagrams. If the manual is unclear or confusing at any point,
call us at 530-893-4915. We’re here to help.
There is a definite advantage in assembling your own loom. You’ll come to
know it very well, sooner than you otherwise would, and the better you
know your loom, the better you’ll be able to use and maintain it.
Tools
You'll need a few basic hand tools to assembly your loom. We recommend a
couple of others that we think will make your job easier.
 Ratchet and sockets: 7/16", 1/2", and 9/16"
 Standard screwdriver
 Medium Phillips screwdriver
 Hammer or mallet
 8" or 10" adjustable end wrench
 Carpenter's level
 Framing square
 Pliers
 Three wooden blocks or books (approximately 2" thick)
 Step stool
 Power screwdriver with assorted bits (optional)
 Extra ratchet and sockets (optional)
You'll need an area roughly 10' x 10' in which to assemble the side frames.
If the floor is concrete, you may want to lay a tarp down to protect the
lacquer finish on the parts.
Once you’ve gathered your tools, place the boxes near the location where
you will be assembling the loom. Please DO NOT REMOVE the tape from
any of the components until we tell you . Also leave the hardware bags
unopened until they are required.
Keep as many of your packing materials as you can in case you need to ship
or store your loom in the future. Clear away your packing materials from
your working space. It’s best if you keep your work area as organized and
free of clutter as possible.