Avitech MCC-8001U Скачать руководство пользователя страница 89

Страница: 89 / 98

Format:

ZN GGMMPP

option (

[larm]/

[order]/

[xtend label background]/

[abel]/

[atio aspect]/

[afe area]/

[ideo format display])

(on) /

(off)

Function:

to turn on / off various options.

Examples

ZN GGMM00 L 0

turns GGMM’s label off.

ZN GGMMPP B 1

turns GGMMPP border on.

ZN GGMMPP S 0

turns GGMMPP’s safe area off.

NOTE:

Each ASCII command can only serve one purpose; multiple options on one

command will not be recognizable.

Format:

ZP GGMMPP L

[oad]

“

filename

.GP#”

load “filename” from RAM

ZP GGMMPP S

[ave]

“

filename

.GP#”

save “filename” to RAM

ZP GGMMPP L

[oad]

load the configuration from EEPROM

ZP GGMMPP S

[ave]

save the configuration to EEPROM

ZP GGMMPP Load Latest

load the latest configuration

Function:

load a previously saved preset or save current layout to a preset.

Description

If the filename includes space(s), use double quotation marks to

signify the complete filename.
If the filename is not specified when saving the file, system will
backup the file into memory.

Содержание MCC-8001U



































































































Результаты поиска

Содержание MCC-8001U

Отзывы:

Avitech MCC-8001U, Руководство пользователя, Страница: 89 / 98

Результаты поиска

Содержание MCC-8001U

Отзывы: