32
© 2009 Directed Electronics
5. Within 5-seconds, press and release the Valet switch the number of
times corresponding to the desired feature listed below. Then press the
Valet switch one more time and
hold
. The siren/horn will sound the num-
ber of times equal to the feature number selected.
6. While holding the Valet switch, assign the selected feature to a
factory button.
Press Lock for 1 short siren chirp/horn honk, or press Unlock for 2 short
siren chirps/horn honks.
Once a feature is programmed
z
Other features can be programmed.
z
Other feature menu can be selected.
z
Learn Routine can be exited.
Accessing additional features
z
Release, then press and release the Valet switch the number of times
to advance from the feature just programmed to the next feature
desired.
z
Press and
hold
the Valet switch once more.
z
The siren chirps/horn honks to confirm the feature selected.
Important:
Horn honks apply only if the horn
wire is connected.
N3001L_2009-04print.qxd 5/12/2009 11:14 AM Page 32
