24
© 2009 Directed Electronics
Data port—Bitwriter
®
The black three-pin port can be used for programming the unit using the
Directed Bitwriter, a hand held programming tool. The Bitwriter also
allows programming of features that are not available in the feature
menus.
Four-pin optional sensor harness
RED wire
The red wire supplies constant power to the optional sensor.
BLACK wire
The black wire supplies ground to the optional sensor.
BLUE, GREEN wires
The blue and green wires are multiplex inputs. They are both tied to the
same zone. If an input of less than 0.8 seconds is supplied to either wire
the Warn-Away
®
response will occur. An input longer than 0.8 seconds
to either wire will initiate the triggered sequence and report zone 4. This
port can be used for optional sensors such as: the 506T—glass break-
age sensor, or the 508D—field disturbance sensor.
N3001L_2009-04print.qxd 5/12/2009 11:14 AM Page 24
