41
AN-16/
i
v
.2 i
Nput
M
odule
u
ser
G
uide
Setup at Front-of-House (FOH)
Place the following at front-of-house:
one AN-16/i v.2 Input Module
•
one
•
AN-16/o Output Module
one AN-16SBR
•
Make these connections:
Set the
1.
Slot Range switch on the AN-16/i v.2 Input Module to
1-16.
Connect the
2.
A-N
et
O
ut
of the AN-16/i v.2 to port
D
on the System Bridge.
Connect the
3.
A-N
et
I
N
of the AN-16/o Output Module to port
A
on the System Bridge.
Finally, connect the stage to the FOH position with a Cat-5 cable connected between the
4.
two
B
rIDge
ports on the System Bridges.
A
B
C
D
PRO16
PORTS
The FOH configuration
P
N
ote
:
Remember that the maximum cable distance must not exceed 400 feet (122 meters)
measured from the AN-16/i v.2 on stage to the AN-16/o at FOH.
