2
AN-16/
i
v
.2 i
Nput
M
odule
u
ser
G
uide
Conventions Used in This Document
AN-Series
The AN-16/i v.2 Input Module, original AN-16/i Input Module, AN-16/i-M Mic Input Module, and AN-16/o
Output Module are referred to generically as the
AN-Series
of products.
When describing audio network configurations, the AN-16/i-M Mic Input Module and most Pro16 console
interface cards can be substituted anywhere the AN-16/i is used.
Using Personal Mixers
It is possible to create an audio distribution and personal monitor system using any combination of Aviom
AN-Series and Personal Mixer products, including the A360, A-16II, and A-16R.
When referring to the use of the Personal Mixers in a system in general, the term
Personal Mixer
is used to
describe a case where an A360 Personal Mixer, A-16II Personal Mixer, or a A-16R Rack-mount Personal Mixer
(with/without the optional A-16CS Control Surface) can be used.
Cat-5 Cables
In most cases unshielded (UTP) Cat-5e, Cat-6, and Cat-6e cables can be interchanged. When speaking
about interconnections between components in a system, the term
Cat-5
is used generically to indicate
the use of any of the applicable cable types.
A-Net Distributors
The A-16D and A-16D Pro A-Net Distributors are referred to generically as
A-Net Distributors
. Both are
used to copy an A-Net digital signal and split it into multiple copies so that devices may be connected in
parallel.
