Aviom AN-16/i v.2 Скачать руководство пользователя страница 19

Страница: 19 / 63

AN-16/

.2 i

Nput

odule

ser

uide

AN-16/i v.2 Features

This section explains the basic layout of your new Aviom Pro16 product and its functions.

A-Net In

Power

v.2

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

The front panel of the AN-16/i v.2 contains the channel information, Mono/Stereo link switches, Signal Present LEDs,

Clip LEDs, A-Net In and Power indicators, and the Input Level switches.

Channel LEDs

The numbered Channels on the AN-16/i v.2 front panel correspond to the sixteen line-level analog audio

inputs on its rear panel. They are grouped together in pairs—Channels 1 and 2, Channels 3 and 4, etc.

Each channel contains two LEDs, one showing that there is an audio signal present, and another used to

indicate that the input to a channel is causing audio clipping. Signal and Clip LEDs appear directly beneath

the channel numbers.

The lower LED, marked

IgNAl

, will light as long as an audio signal of at least -40dB is present on the

channel. It provides an easy way to confirm that audio is indeed passing into the AN-16/i v.2 and being

converted to A-Net.

The upper LED is marked

lIp

. It will light if a signal reaches a point that is within 3dB of full scale (0dB).

In general, you want to operate the system so that the Clip LED lights only occasionally (the transients of

percussive sources will typically peak for a few milliseconds, for example). If the LED is on constantly, you

should either lower the level of the source audio coming into the AN-16/i v.2 or try different Input Level

settings.

Input Level Switch

The AN-16/i v.2 has been designed to accept a wide range of professional and semi-professional audio

levels. There are four Input Level gain settings available. Changes to the input level on the AN-16/i v.2 front

panel affect a pair of channels at a time.

The four levels are +22dBu, +4dBu, 0dBu, and -10dBV. To select the proper Input Level setting, choose

the Input Level position that most closely matches the maximum output level of the audio gear being

connected to the AN-16/i v.2 rear panel TRS jacks.

Содержание AN-16/i v.2
































































Результаты поиска

Содержание AN-16/i v.2

Отзывы:

Похожие инструкции для AN-16/i v.2

Бренды по названию

Популярные бренды

Aviom AN-16/i v.2, Руководство пользователя

Результаты поиска

Содержание AN-16/i v.2

Отзывы:

Похожие инструкции для AN-16/i v.2

Бренды по названию

Популярные бренды