28
AN-16/
i
-M M
ic
i
Nput
M
odule
u
ser
G
uide
Some points to remember about using the A‑Net Expansion jacks on the
Pro16 input modules and AN‑16/o to create a digital snake or audio network:
When creating a network with four Pro16 Series units, one
•
A‑Net Expansion jack will be connected to an A‑Net
In
port
while the other A‑Net Expansion jack will be connected to
an A‑Net
Out
port.
The A‑Net
•
Out
jacks on the AN‑16/o Output Modules
should be empty when only four Pro16 Series units are
being used to create a network. These are then available
for adding audio splits with additional AN‑16/o Output
Modules or for connecting to a Personal Monitor Mixing
System.
The cable connecting the two sides of the network (carry‑
•
ing thirty‑two channels of audio) should be connected to
one A‑Net
In
port and one A‑Net
Out
port.
Do not connect Cat‑5e cables carrying expanded system
•
data (more than 16 channels) to an A‑16D A‑Net Distributor
or A‑16II Personal Mixer.
The maximum cable length specification of 500 feet (150
•
meters) applies to the length between an A‑Net
In
port
and an A‑Net
Out
port. Cables used to connect devices via
the A‑Net Expansion jacks must fall within this maximum
distance.
An A‑Net Expansion port is never connected to another
•
A‑Net Expansion port.
The A‑Net Main Out on the AN‑16/i‑M is the only A‑Net jack
•
that works with the Expansion port.
In the following examples, either A-Net input module, the AN-16/i or the
AN-16/i-M, can be used. Only one device is shown in the illustrations. They are
referred to generically as “Pro16 input modules
.”
Содержание AN-16/i-m
Страница 1: ...P N 9310 1007 0001 rev 2 00 2009 Aviom Inc User Guide A N e t I n p u t M o d u l e AN 16...
Страница 52: ...44 AN 16 i M Mic Input Module User Guide Dimensions...
Страница 53: ...45 AN 16 i M Mic Input Module User Guide...
Страница 58: ...1157 Phoenixville Pike Suite 201 West Chester PA 19380 Voice 1 610 738 9005 Fax 1 610 738 9950 www Aviom com...
