Aviom AN-16/i-m, Руководство пользователя

Страница: 15 / 58

7 AN-16/
i
-M M
ic
i
Nput
M
odule
u
ser
G
uide
cable length specification can be compromised by using inline couplers or
other passive connection devices.
AC Line Conditioning
Aviom products are digital devices and as such are sensitive to sudden spikes
and drops in the AC line voltage. Changes in the line voltage from lightning,
power outages, etc. can sometimes damage electronic equipment.
To minimize the chance of damage to your equipment from sudden changes
in the AC line voltage, you may want to plug your equipment into a power
source that has surge and spike protection. Power outlet strips are available
with built‑in surge protection circuits that may help protect your equipment.
Other options for protection of your equipment include the use of an AC
line conditioner or a battery backup system (sometimes referred to as an
uninterruptible power supply , or UPS).
Rack Mounting
The AN‑16/i‑M Mic Input Module is designed to be installed in a standard
19‑inch audio equipment rack. Each unit takes up three standard rack spaces
(19 inches wide by 5.25 inches high).
The rack ears on each side of the device are designed to support the weight
of the AN‑16/i‑M without additional hardware. Each rack ear contains holes
for two screws per side. Always support the unit with all four screws.
To rack mount Mic Input Module, position it in the equipment rack at the
desired location. Use standard rack‑mounting screws (10‑32 size) to attach
the unit to your rack hardware. Tighten all four screws firmly, but avoid
overtightening.
Aviom suggests the use of non‑metallic washers between the rack‑mounting
screws and the device’s finished surface to avoid marring the painted finish
on your Aviom products.
Always allow adequate ventilation for devices mounted in equipment racks.
Avoid placing your AN‑16/i‑M directly above or below other rack‑mounted
devices that produce high levels of heat, such as power amps.