Avidyne Entegra EXP5000, Руководство пилота

Страница: 22 / 61

EXP5000 System Overview
Entegra EXP5000 PFD -16- 600-00104-001 Rev 01
2) Bearing (Secondary Navigation) —Controls the source for the
Bearing Pointer and adjacent data block. In a dual GPS/VHF
navigator system, the available sources are: GPS 1, VLOC 1,
GPS 2, VLOC 2, ADF (if available), OFF.
3) Aux (Auxiliary Navigation) —Controls the source of the
adjacent data block only. In a dual GPS/VHF navigator system,
the available sources are: GPS 1, VLOC 1, GPS 2, VLOC 2, ADF
(if available), OFF.
4) HSI Moving Map Range and View Button (Range/View) —
When selected, Range/View allows the left knob to control the
HSI’s moving map range and view:
■
Pushing the knob —Cycles the HSI through the HSI views
(360° with map; 360° without map, 120° with map; 120°
without map).
■
Rotating the knob —Changes the HSI moving map range
when the map is available.
For more information about the HSI Map, see Setting Up the
HSI , on page 26.
5) Left Knob —The function of the left knob changes depending on
the enabled button.
■
When Nav is enabled, the Crs Set label displays when you
can set a course, as shown in Table 2.1. For information
about setting a course, see Section 3.5, "Using GPS/VHF
Systems with the EXP5000" on page 27.
Table 2.1 Crs Set Labels
NAV Source GPS Nav Condition Left Knob Label
GPS 1 or GPS 2 GPS in Auto-Leg mode None
GPS 1 or GPS 2 GPS in OBS mode
VLOC 1 or VLOC 2 Tuned NavAid is a VOR
VLOC 1 or VLOC 2 Tuned NavAid is an ILS or LOC