Avidyne Entegra EX5000, Руководство пилота

Страница: 17 / 200

Using the Entegra EX5000 MFD
600-00121-001 Rev 01 -3- Entegra EX5000
3) Data Port —Provides a front panel access point for loading
database updates.
4) Buttons —Used to select modes or change the display as
indicated. Buttons are active when a label appears on the screen
adjacent to the key.
5) Radar Control (Brg) —The left outer knob controls the radar
bearing selection when radar is enabled.
6) Radar Control (Tilt) —The left inner knob controls the radar’s tilt
selection when radar is enabled.
7) Page Control —The right outer knob provides quick access to the
main EX5000 pages, including the Map page, Trip page, and Aux
page, as well as the main pages for any optional features. The
current page is highlighted in the Page Bar on the lower right
corner of the screen.
8) Range & Cursor Control —When the Map page is displayed, the
right inner knob controls the range of the Map page. When other
pages are displayed, this knob is used to select options.
9) Message Bar —The message bar keeps you informed about
critical as well as routine information from the EX5000. When the
EX5000 has information to convey, the message bar appears
next to the bottom right button.
Note: When removing the rubber cap from the data port, pull the cap gently
from the top until it pops out. Make sure the cap is out of the way (but not
removed) before plugging anything into the USB port.
Do not tug on the tab at the bottom of the cap; this can cause the loss of the
protective cap.
Note : The map range choices change depending on the radar configured
The Map page and Radar page always use the same selected range;
switching between them displays the same range.
Note : The message bar displays one message at a time. If more than one
message is available, the message bar displays the highest priority
message first. Press the ACK button to clear the current message and view
those underneath.