Avidyne 700-00004 Series Скачать руководство пользователя страница 44

Страница: 44 / 132

EX5000 Installation Manual

P/N 600-00073 Rev 24

- 34 -

5.4.2 Working in Maintenance Mode

As shown in Figure 7, the Maintenance Mode Page contains setup buttons for the available EX5000
features. When you select a Setup feature, the appropriate page displays. From the Setup page, the
following options will always be available:

●

Select Knob

—Rotate to change the highlighted parameter box.

●

Change Knob

—Rotate to select a parameter to modify from the highlighted box.

●

Save

—Store any setup changes made since entering the page and return to the Maintenance

Mode Main page.

●

Cancel

—Return to the Maintenance Mode Main page without saving your changes

➤

When working in Maintenance Mode:

After making changes to each setup page press

Save

to save your changes and return to the main

menu.

To exit without saving your changes, press

Cancel

Changes in the setup pages do not take effect until the MFD has been restarted. From the
Maintenance Mode Page, press

Restart System

➥

Avidyne suggests that you restart the system after you make changes to each setup page.

If no changes were made, press

Back to Map

to exit Maintenance Mode.

Содержание 700-00004 Series





































































































































Результаты поиска

Содержание 700-00004 Series

Отзывы:

Avidyne 700-00004 Series, Руководство по установке, Страница: 44 / 132

Результаты поиска

Содержание 700-00004 Series

Отзывы: