manualshive.com logo in svg

Avidyne 700-00004 Series, Руководство по установке, Страница: 33 / 132

Поделиться
Скачать
Avidyne 700-00004 Series Скачать руководство пользователя страница 33

 

EX5000 Installation Manual

 

P/N 600-00073 Rev 24

- 23 -

 4.5 Electrical Load Analysis

Before installing the MFD, perform an electrical load analysis that is specific to the aircraft. This 
analysis should be in accordance with AC 43.13-1B, Chapter 11. 

Use the following values to support the analysis:

●

28 VDC Nominal Load

—2 A

●

28 VDC Maximum Load

—5 A

Ensure that the power input to the MFD is circuit-protected in accordance with the guidelines of AC 
43.13-1B, Chapter 11, Section 2. 

➥

A 7.5 amp circuit breaker is recommend for use with the MFD.

 4.6 Datalink Antenna Installation Considerations

The EX5000 supports the following 2-Way Datalink installations:

●

MLX770 Iridium Datalink transceiver

●

Built-in ORBCOMM Datalink transceiver

For information on MLX770 installation, refer to the 

MLX770 Datalink Transceiver Installation Manual

 

(600-00204-000).

Note:

ORBCOMM is not supported with hardware part numbers 700-0004-007/008/009/010, 700-
00030-805 and software part numbers 530-00162-000, 530-00180-100, or 530-00201-().

The ORBCOMM datalink system is designed to work with a VHF antenna covering the band from 137 
MHz to 151Mhz. If an existing comm antenna is in the preferred location for a datalink antenna, 
consider using the Avidyne DC50 Datalink Coupler and replacing the existing comm antenna with a 
combined VHF/datalink antenna. Please contact Avidyne for details.

The EX5000 also supports Broadcast Weather data, which provides more weather data in a more 
timely fashion. Avidyne supports two Broadcast Weather suppliers:

●

XM WX Satellite Weather, using the XMD076 XM WX Receiver from Heads Up Technologies.

●

WSI Weather, using the Avidyne MLB700.

The Broadcast datalink system operates in the S-band at 2.3 GHz. Several types of combination 
antennas are available in addition to the standalone broadcast antenna. Contact Heads Up 
Technologies or Comant, Inc. for details on available XM antennas.  Contact Avidyne for information 
on available Sirius antennas.

The EX5000 can operate with two different Datalink systems simultaneously. With both 2-Way and 
Broadcast Datalink systems installed, the EX5000 can provide Avidyne's unique Multilink features, 
which include text messaging, flight tracking, and enhanced weather coverage.

Содержание 700-00004 Series





































































































































Отзывы:

Нет отзывов