Avidsen 114174 Скачать руководство пользователя страница 22

Страница: 22 / 56

Passive magnet

Grommet

Electronic

card

Contactor

Pre-wired

magnet

6.7 - BACKUP BATTERY (OPTIONAL ref. 580293)

The backup battery is useful in case the power is cut and it enables you to operate the motor drive for

several days.

• Cut off the 230V power supply (safety switch to the OFF position) and connect the battery to the

BAT

terminal.

• Turn the 230V power supply back on (safety switch to the ON position).

• The battery will charge in approximately 24 hours. Beyond this time, test the gate’s operation (1 opening

+ 1 closing) after having switched the motor drive off (safety switch in the OFF position).

• After this test, reconnect the power supply (safety switch to the ON position). The battery will take over

if the power is cut.

6.8 - SOLAR POWER KIT

Please note that, while the motor drive can be powered by a solar kit, the connected module will

not be operational.

• The 24V solar power kit is plugged into the same connector as the backup battery. The solar power kit

(which already has a battery) and a backup battery cannot be connected at the same time.

• For installation, refer to the solar power kit instructions.

• When a solar power kit is connected, if you press the “OK” button on the electronic card, the number of

red LEDs that light up indicates the battery charge level.

C - INSTALLATION

CONNECTED MOTOR DRIVE KIT WITH ACTUATORS

Содержание 114174

























































Результаты поиска

Содержание 114174

Отзывы:

Похожие инструкции для 114174

Бренды по названию

Популярные бренды

Avidsen 114174, Руководство пользователя

Результаты поиска

Содержание 114174

Отзывы:

Похожие инструкции для 114174

Бренды по названию

Популярные бренды