manualshive.com logo in svg

Avid Technology VENUE SC48, Руководство пользователя

Аппарат VENUE SC48 от Avid Technology – удобная и мощная система для профессионального звукового оборудования. Здесь вы можете бесплатно скачать инструкцию по эксплуатации на {веб-сайте}, чтобы настроить и использовать ваше устройство на максимум его возможностей.

Поделиться
Скачать
background image

VENUE SC48 Guide

240

Installing Pro Tools LE

If you are installing Pro Tools LE on a computer for the first 
time, use the Pro Tools LE Installer disc included with the
VENUE SC48 to install all software and drivers for FWx record-
ing and playback. 

For step-by-step instructions on installing and authorizing 
Pro Tools LE software and configuring your Pro Tools system, 
refer to the

003 & 003 Rack Setup 

guide located on the 

Pro Tools Installer disc.

Using Lower Versions of Pro Tools LE with 
FWx

VENUE SC48 comes with a copy of the most recent version of
Pro Tools LE software. Use the included version to guarantee 
that all software (drivers) for FWx are installed automatically. 

If for whatever reason you want or need to use a lower version
of Pro Tools, your exact software installation steps may vary as
follows:

Pro Tools 7.1.1 or higher  

No extra installation is required.

With Pro Tools 7.1.1 and higher, the Pro Tools software driver
for FWx is installed automatically.

Pro Tools 6.7-7.1.0 

You must manually install the Pro Tools 

software driver for FWx. The procedure for installing the 
driver differs for computers with DVD drives and computers 
with CD-ROM drives.

If your computer has a DVD drive, do the following:

„

Use the Pro Tools Installer disc included with the SC48. Fol-

low the installation and configuration instructions in the

 003 

& 003 Rack Setup 

guide.

If your computer does not have a DVD drive, you will need the 
original Pro Tools LE Installer CD-ROM.

If your machine does NOT have a DVD drive, do the following:

1  

Power up your VENUE system.

2  

Connect one end of a FireWire cable to an FWx port on the 

SC48. Connect the other end to an available FireWire port on 
the Pro Tools host computer.

3  

Insert the original Pro Tools LE Installer CD-ROM in your 

CD-ROM drive

4  

Launch Pro Tools. Upon starting, Pro Tools LE detects the 

presence of FWx and automatically installs the FWx driver
from the Pro Tools LE Installer CD-ROM

Using FWx

With FWx you can record and archive performances, as well as 
integrate pre-recorded Pro Tools tracks with your live inputs.

FWx Outputs (Recording) 

FWx provides 18 assignable outputs 

for recording into Pro Tools. For information on assigning 
channels for recording, see “Signal Routing for FWx Record-
ing” on page 240.

FWx Inputs (Playback) 

FWx provides 18 assignable inputs for 

playback of Pro Tools tracks through your system. For infor-
mation on assigning Pro Tools tracks for playback, see “Signal 
Routing for FWx Playback” on page 242.

Pro Tools Settings

The connection to the FWx card is reflected in the Pro Tools 
Hardware Setup dialog, and FWx inputs and outputs appear in
the Pro Tools I/O Setup dialog and track I/O selectors. This lets
you assign track inputs and outputs to FWx. 

Signal Routing for FWx Recording

You can assign any mono or stereo channel to FWx channels, 
including channel Direct Outputs, Mains, Auxes, mono or ste-
reo Groups, and Matrix outputs. Use the Patchbay > Outputs
page to route output busses or Direct Outputs to FWx chan-
nels 1-18 for recording.

‹

Using Direct Outputs lets you record discrete channels from 

the pickoff point you choose.

‹

Using Mains, Aux, Group, or Matrix lets you record a stereo

main mix, one or more stereo submixes, or any combination 
of these, up to the number of available FWx channels. 

To route multiple Direct Outputs to Pro Tools for a multitrack 
recording:

1  

In the Patchbay, click the Directs tab.

2  

Click the tab at the left of the grid for the channel or bus 

type you are routing.

3  

Click the Pro Tools tab at the top right of the grid to show

the available FWx channels.

When using FWx, Pro Tools session bit depth and sample 
rate are fixed at 24-bit/48 kHz, and cannot be changed.

For complete information on configuring your Pro Tools 
system, see the 003 & 003 Rack Setup guide or the 
Pro Tools Reference Guide.

If you configure the Patchbay for playback as well as 
recording through FWx, be sure to check Pro Tools 
track outputs for any potential feedback loops before re-
cord enabling tracks. 

courtesy of

www.sxsevents.co.uk

Phone: 0870 080 2342

email: [email protected]

Event production and Audio-Visual Services

www.sxsevents.co.uk

Содержание VENUE SC48

















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VENUE SC48

Yamaha CL3 Service Manual preview
CL3
Бренд: Yamaha Страницы: 401
Yamaha CL3 Owner'S Manual preview
CL3
Бренд: Yamaha Страницы: 65
Daktronics All Sport 5000 Quick Start Manual preview
All Sport 5000
Бренд: Daktronics Страницы: 4
Pacer Single Owner'S Manual preview
Single
Бренд: Pacer Страницы: 20
First Degree Fitness Fluid Rower FDF User Manual preview
Fluid Rower FDF
Бренд: First Degree Fitness Страницы: 14
Behringer Noise Reducer NR300 Manual preview
Noise Reducer NR300
Бренд: Behringer Страницы: 32
TECHWOOD TMM-8001 Instruction Manual preview
TMM-8001
Бренд: TECHWOOD Страницы: 11
Strymon brigadier User Manual preview
brigadier
Бренд: Strymon Страницы: 8
Aries AR323 Assembly Instructions Manual preview
AR323
Бренд: Aries Страницы: 8
Varimixer TEDDY W5A Operating Instructions Manual preview
TEDDY W5A
Бренд: Varimixer Страницы: 8
Saturn ST-FP1040 Manual preview
ST-FP1040
Бренд: Saturn Страницы: 36
Nady Audio SPM-4250 Owner'S Manual preview
SPM-4250
Бренд: Nady Audio Страницы: 12
Emerson EMMC35881 Instruction Manual preview
EMMC35881
Бренд: Emerson Страницы: 14
AEG HM6 Series Instruction Book preview
HM6 Series
Бренд: AEG Страницы: 16
AEG HM 310 Assistent Operating Instructions Manual preview
HM 310 Assistent
Бренд: AEG Страницы: 48
Honeywell HON 985A Manual preview
HON 985A
Бренд: Honeywell Страницы: 16
Acoustic Control GAMMA CUMULUS Owner'S Manual preview
GAMMA CUMULUS
Бренд: Acoustic Control Страницы: 2
Sound Devices 552 User Manual And Technical Information preview
552
Бренд: Sound Devices Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды