Avid Technology Pro Tools S6 Master Post Module Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 92

background image

Chapter 6: Installing Modules

51

Chapter 6: Installing Modules

This chapter shows you how to install and connect hardware modules into an assembled frame.

The basic steps for installing and connecting modules are as follows:

• Populate the first (left-most) chassis with all its modules. Install and connect modules in each chassis, front-to-back.

• Repeat to populate all other chassis with modules.

• Install Display Modules, if any.

About These Instructions

The following instructions show an S6 M40 24–5 system as an example configuration (see Figure 34). This configuration provides
24 fader strips with 5 knobs per strip, plus a standard master section module configuration.

• 3 Fader Modules
• 3 Process Modules
• 3 Knob Modules
• 1 Master Module (M40)
• 1 Automation Module

This example configuration has the master section modules at the far right of the system with faders to the left. However, modules
can be arranged in many different positions as explained in Chapter 2, “Modules and Configuration Overview.” Your exact instal-
lation procedure will differ slightly from this example configuration depending on your system and arrangement of modules.

The Master Module requires several special connections that are unique from other modules. Be sure to follow all instructions
carefully.

Figure 34. Arrangement of modules in example S6 M40 24-5 system

«
...
57
58
59
60
61
...
»

Содержание Pro Tools S6 Master Post Module





























































































Отзывы:

Нет отзывов

Похожие инструкции для Pro Tools S6 Master Post Module

Бренд: Taylor Made Страницы: 2

Бренд: York Fitness Страницы: 18

Бренд: Safco Страницы: 2

Бренд: Omni Страницы: 193

Бренд: ParaBody Страницы: 4

Бренд: FJC Страницы: 2

Бренд: AAON Страницы: 36

Бренд: Unitary products group Страницы: 28

Marathon Multi600

Бренд: Saeyang Страницы: 21

Бренд: S&C Страницы: 11

Бренд: Quadro mdb Страницы: 11

Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology...

Бренд: M-Audio Страницы: 25

Бренд: GE Страницы: 37

Бренд: Twiflex Страницы: 5

Бренд: Waves Страницы: 8

Бренд: PARAMOUNT BED Страницы: 28

Бренд: FOAMICO Страницы: 19

Бренд: Inspire Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды