Avid Technology MV3000 DELTA Скачать руководство пользователя страница 137

Страница: 137 / 188

T1689 Technical Manual Rev 07

PDS Commissioning Guidance

MV3000 Air Cooled DELTA

System Configuration When Non-operational

Page 137

7.4

SYSTEM CONFIGURATION WHEN NON-OPERATIONAL

The installation, configuration and modes of operation of this equipment may require internal heating during

periods when the main drive is not powered to prevent condensation forming.
The implementation of this type of heating is dependent on the following:

•

External environmental conditions;

•

Required internal environmental limits;

•

External power sources;

•

Safety implications of powered heater elements.

7.5

FUNCTIONAL TESTS

7.5.1

Software

Drive software will already be installed in the controller. This will need to be checked to ensure it is the latest

version. If not, the latest version must be installed.
The drive controller will need to be loaded with the relevant application code. A PC with Drive Coach

software will be required for this.
For information on how to perform software updates / installation, see T1676 (or T2002 for AEM drives), T1679

and the specific application notes prepared for the system.

7.5.2

Fans

Ensure that all fans operate as they should, fans could include:

•

DELTA cooling fans;

•

Enclosure fans;

•

Controller fan.

7.5.3

Communication Links

Ensure that the communication links to the drive are operational. These should be initialised by following the

guidance provided by the relevant Instruction Sheet. The communication links could include CANopen,

Ethernet and Serial Links.

7.5.4

Plant I/O

Check all feedback signals into the I/O circuits are functioning. This could include cooling system feedbacks,

and “User Daisy Chain” healthy signals. The operation of these circuits will be detailed in the circuit diagrams

and the Test Specification produced by the enclosure manufacturer.

7.5.5

Power Circuit

The commissioning procedure for the power circuit should be determined by the final customer. Reference

should be made to the Getting Started Manual T1676 (or T2002 for AEM drives) and the enclosure

manufacturer installation instructions.

Содержание MV3000 DELTA





























































































































































































Результаты поиска

Содержание MV3000 DELTA

Отзывы:

Бренды по названию

Популярные бренды

Avid Technology MV3000 DELTA, Техническое руководство

Результаты поиска

Содержание MV3000 DELTA

Отзывы:

Бренды по названию

Популярные бренды