Avid Technology iNEWS, Руководство по установке и эксплуатации

Страница: 62 / 152

Chapter 4
62
4. Save the map story.
5. Test monitor the show to ensure map story entries are functioning
correctly.
The monitor server only examines the show’s map story entry when a user
turns it on, so any changes to the show’s map story entry will not take
effect until then. Changes made to the show’s map story entry after the
show is monitored do not take effect until the next time the show is
monitored.
For this reason, you should monitor the show after creating or modifying
the show’s map story entry to test the changes you make. Monitoring the
show allows the monitor server to check your work and ensures smooth
operation when you produce the show.
Step 7: Adding IP Addresses for the MOS Gateway
To enable monitor server to communicate with MOS Gateway, the IP
address of the MOS Gateway Server must be added to all iNEWS Servers’
/etc/hosts
files.
Ideally, all MOS Gateway Servers and iNEWS Servers would have each
other’s addresses and computer names.
See “Adding IP Addresses on
MOS Gateway Server” on page 24 for more information. The following
procedures explain how to add the MOS Gateway IP addresses to the
iNEWS Servers.
n
To maximize reliability and minimize latency, MOS Gateway should be
installed on the Mirror Net of the iNEWS hosts, and static IP addresses
should be used in
/etc/hosts
files. This will avoid dependence on
DHCP or DNS servers.
Parameters for MOS Devices:
None at Present Put a dash (-) in this field.
Table 3 Device List Line Parameters (Continued)
Parameter Definition