Avid Technology iNEWS, Руководство по установке и эксплуатации

Страница: 122 / 152

Appendix B
122
<!--The handlesRoStoryMoveMultiple element specifies whether this device -->
<!--supports the roStoryMoveMultiple message. The router defaults to YES. -->
<!--Valid settings are YES or NO -->
<handlesRoStoryMoveMultiple>NO</handlesRoStoryMoveMultiple>
<!-- -->
<!--The handlesRoItemLevelCommands element specifies whether this device -->
<!--supports roItemInsert, roItemDelete and roItemReplace.The router defaults-->
<!--to YES. Valid settings are YES or NO -->
<handlesRoItemLevelCommands>NO</handlesRoItemLevelCommands>
<!-- -->
<sendRoCreateOnStartLoad>NO</sendRoCreateOnStartLoad>
<!-- If YES then the stories page number from NRCS is prepended to the story -->
<!-- slug. -->
<prependPageNumber>YES</prependPageNumber>
<!-- -->
<!--The character seperator used between the page number and the story slug.-->
<prependSeparator>-</prependSeparator>
<!-- -->
<!--The character string which is used in place of an empty page number.-->
<prependStringForEmptyPageNumber>XXX</prependStringForEmptyPageNumber>
<!-- -->
<handlesSpecMosReqAll>NO</handlesSpecMosReqAll>
<!--The statusTranslations element defines the status strings that correspond -->
<!--to the various NRCS status codes. This allows the MOS Gateway to translate-->
<!--the roItemStatus messages received from a MOS into status codes that NRCS -->
<!-- can recognize and display. -->
<statusTranslations>
<statusUnknown>UNKNOWN</statusUnknown>
<statusUnavailable>NOT READY</statusUnavailable>
<statusUnavailable>DELETED</statusUnavailable>
<statusUnavailable>ERROR</statusUnavailable>
<statusAvailable>READY</statusAvailable>
<statusCueing/>
<statusCued>CUED</statusCued>
<statusCued>STAND BY</statusCued>
<statusTensionReleased/>
<statusPlayRequested/>
<statusPlaying>PLAY</statusPlaying>
<statusPaused>PAUSED</statusPaused>
<statusStopped>STOP</statusStopped>
<statusStopped>END</statusStopped>
<statusRewinding/>
</statusTranslations>
<mosObjReplication>
<trigger>scheduled</trigger>
<replicationTime>1:46:00 PM</replicationTime>
<clearQueue>true</clearQueue>
<path>mos.sony</path>
</mosObjReplication>
</mosDevice>
<mosDevice>
<!-- The names element contains mapping of MOS's mosID value to -->
<!-- an NRCS device name, as well as the network name of the MOS. -->
<names>
<mos>NewsQPro</mos>
<amcp>NQProem</amcp>
<network>mosman</network>
</names>