Avid Technology iNEWS, Руководство по установке и эксплуатации

Страница: 42 / 152

Chapter 4
42
These tasks are covered in the next two sections.
Reconfigure the System
You do not need to stop
anything to reconfigure
the system. To reconfigure the system:
1. At the console, select the master computer (typically server A).
2. Type
su
to log in as superuser and type the superuser password.
3. Type:
NRCS-A# offline
4. Type:
NRCS-A# configure
5. When the prompt returns, bring the system online again by typing:
NRCS-A# online
A message similar to the following will appear:
6. After you see the System being configured message, exit
from superuser mode. (Ctrl+D)
Unlike other utility programs, it is not necessary to start a monitor server
when you add it to the configuration file. It starts when someone uses the
monitor on
or
monitor load
command for the rundown queue to
which you have assigned the monitor server.
Assigning the Mailbox to the Rundown Queue
Mailboxes are assigned
to queues in the same
way other database
traits are—using the
Queue Properties
dialog box. See
Chapter 5 in the
iNEWS
Newsroom Computer
System Operations
Manual
for more
information.
After you choose the monitor server’s mailbox number and verify that it is
not used by another device, you must also assign it to the show’s rundown
queue, being monitored by the monitor server.
For instance, the rundown queue in the following procedure is
SHOWS.6PM.RUNDOWN
, and the mailbox being assigned is number 267.
A Wed Oct 3 00:18:58 2001 msg System being configured