Avid Technology EUCON, Руководство по установке приложения

Страница: 33 / 49

EUCON Application Setup Guide 30
Flip to Faders (MC Mix)
Flipping the plug-in's parameters from knobs to faders allows changing eight parameters simultaneously. Flipping bus sends to
faders makes it easier to send multiple signals to an effect and better controls effects textures in your mix.
1
Select a track on the Artist media controller.
2
Press the
INSERTS
knobset selector (MC Mix) or the
INSERTS
Knob Top (MC Control).
3
Press a Knob Top to open a plug-in.
4
Press the
FLIP
key to flip the knobs to the faders.
You can now control the plug-in on the faders.
5
Press the
FLIP
key to flip the faders back to the knobs.
6
Press the
BACK
key to close the plug-in.
Flip also works for
AUX
,
PAN
,
DYN
,
EQ
, and other knobsets.
Wheel Edit Modes (MC Control)
Using the Jog Wheel instead of the mouse is a faster way to trim head and tail of a region, fade a region in and out, and adjust
gain.
1
Select a track on the Artist media controller.
2
Select an audio region on the track.
3
Zoom in to the region using the Jog Wheel.
4
Page down twice on the Softkeys.
5
Select
Fade In
.
6
Use the Jog Wheel to select the fade in region.
7
Repeat using gain, fade out, move.
Create and Control Surround Panner
Using knobs and faders without looking at the screen to control the balance of your surround mix allows you to remain more en-
gaged with your mix.
1
Create a 5.1-channel bus in the project.
2
Press the
MIX
knobset selector (MC Mix) or
MIX
Knob Top (MC Control).
3
Select
5.1
.
4
Press the
BACK
key to exit.
5
Press the
Pan
knobset selector (MC Mix) or Pan Knob Top (MC Control).
You can now control the surround panning.
6
Press the
BACK
key to exit.