Avid Technology EUCON, Руководство по установке приложения

Страница: 14 / 49

Chapter 3: Logic Pro 11
Chapter 3: Logic Pro
Logic Pro works with your Artist media controller with very little additional setup. Make sure the EuControl software is running.
Launch Logic Pro and click in a Logic window so it is the front-most application. Your surface now controls Logic Pro.
To make sure your Artist media controller works correctly with Logic Pro:
1
In Logic Pro, choose
Logic Pro -> Preferences -> Control Surfaces -> Setup...
The Logic Control Surface Setup window appears.
2
In Control Surface Group 1 on the left side of the window, locate Channel Strip View Mode (fourth parameter from top).
3
Set this parameter to Arrange , not one of the other settings.
Use Software Update so your Mac stays updated to the latest version of Logic Pro.
Tips and Shortcuts
Instantiate and Control Any Plug-in
Placing plug-ins on a track and controlling them from the Artist media controllers can speed up your workflow. Using knobs in-
stead of a mouse to control a plug-in not only provides more intuitive, higher resolution control, but also enables simultaneous
control of multiple parameters. You can dial in settings or automate plug-in control without mousing around or drawing lines
in the arrange window.
1
Select a track on the Artist media controller.
2
Press the
INSERTS
key (MC Mix) or the
INSERTS
Knob Top (MC Control).
3
Press both
PAGE
keys simultaneously to enter Config mode.
4
Push the Knob Top beside the Insert you wish to assign the plug-in to.
5
Push the type for the type of plug-in you wish to instantiate.
6
Press the Knob Top to select the actual plug-in.
7
Press the Knob Top to select the channel format.
Logic Control Surface Setup window