Avid Technology DSI-192, Руководство по установке

Страница: 6 / 21

Overview 1
Overview
This guide provides instructions for installing the following I/O cards in Stage 64 and Stage 32 I/O racks for VENUE | S6L systems:
• SRI-192 Analog Input card
• DSI-192 Digital Input card
• SRO-192 Analog Output card
• DSO-192 Digital Output card
Stage 64 supports installation of up to eight input cards (providing a maximum of 64 input channels) and up to four output cards
(providing a maximum of 32 output channels). Stage 64s can be purchased empty, or in their base configuration of 48 in/8 out.
Stage 32 supports installation of up to four input cards (maximum of 32 input channels), or up to four output cards (maximum of
32 output channels), or any combination of input and output cards up to the maximum of 32 channels total. Stage 32s can be pur-
chased empty, or in their base configuration of 24 in/8 out.
Stage I/O Card Features and Capabilities
SRI-192 Analog Input Card
• Eight channels of analog mic/line inputs via XLR-3 female connectors
• +48V phantom power, 20 dB pad, and phase reverse (all selectable per channel via the control surface and VENUE software)
• Signal and phantom power LEDs for each channel
• 24-bit A/D conversion, up to 192 kHz sample rate
DSI-192 Digital Input Card
• Eight channels of digital inputs via four two-channel AES/EBU XLR3-female connectors or a single ADAT TOSLINK
optical connector
• Automatic sample rate conversion (SRC) and detection on input; manually defeatable for lowest possible input latency
• SRC and Lock status LEDs for both AES and ADAT connections
• Word clock output for synchronizing external digital devices
SRO-192 Analog Output Card
• Eight channels of analog line outputs via male XLR-3 connectors
• Automatic muting for system protection
• Signal and Mute LEDs for each channel
• 24-bit D/A conversion
DSO-192 Digital Output Card
• Eight channels of digital outputs via four two-channel AES/EBU XLR3-male connectors and/or a single ADAT TOSLINK
optical connector
• Simultaneous output to both AES/EBU outputs and ADAT optical output
• Automatic muting for system protection
• Signal and Mute LEDs for each AES/EBU channel pair
For instructions on installing the DNT-192 Dante Option card, see the documentation included in its package.