AVGear AVG-UHMS44, Руководство пользователя

Страница: 14 / 36

AVG-UHMS44
5.1.4. Clear Operation
When you accidently switch an output channel, learn EDID data, or set EDID data,
press the
Clear
button to withdraw the operation before you press “
ENTER
” to carry
on. When you press it, the matrix will return to the previous status.
5.2. IR Control
By using IR & HDBaseT transmission technology, the AVG-UHMS44 has the
following functions:
1.
Control far-end output device from local matrix location.
2.
Control local input/output device remotely.
3.
Control the AVG-UHMS44 locally/remotely.
5.2.1. Usage of IR Remote
Standby button, press it to enter/ exit standby mode
Input channels, range from 1~4 (buttons 5~8 are not
available), corresponding IR signal switched
synchronously when switching input channels.
Menu buttons,
ALL
,
EDID
and
CLEAR
, have the same
functions as front panel buttons. Please refer to
4.1
Front Panel Button Control
for details.
: Navigation buttons.
ENTER: Confirm button.
OUTPUTS (buttons 5~8 are not available)
In normal mode: output channel selection buttons, each
channel has 1 IR IN, 1 HDBaseT, 1 RS232, and 1
AUDIO outputs, and channel 1~4 have HDMI outputs.
In EDID programming mode: press button 1/2 to switch
among the 5 embedded EDID data
Note:
With this IR remote, AVG-UHMS44 can be controlled by the built-in IR, the
extended IR receiver connected to the “IR EYE”/”IR ALL IN” and the IR receiver on
the far-end receiver.