AVGear AVG-UHMS44, Руководство пользователя

Страница: 10 / 36

AVG-UHMS44
4.4. Connection Procedure
Step 1.
Connect HDMI sources (e.g. DVD) to HDMI inputs of the AVG-
UHMS44 with HDMI cables.
Step 2.
Connect HDBaseT receivers (e.g. AVG-HD300R) to the HDBaseT Output
ports with twisted pair.
Step 3.
Connect HDMI displays (e.g. HDTV) to HDMI outputs of the AVG-
UHMS44 or the receivers with HDMI cables
Step 4.
Connect speakers/headphones to AUDIO output ports
Step 5.
Connect the RS232 port of control device (e.g. a PC) to the RS232 port of
either AVG-UHMS44 or far-end receivers. RS232 signal can be
transmitted bi-directionally between AVG-UHMS44 and far-end receivers.
Step 6.
AVG-UHMS44 can collect IR signals sent by the included IR remote via its
built-in IR sensor or through external IR receiver connected to the IR IN/ IR
EYE/ IR ALL IN port. The IR signal can be transmitted bi-directionally
between AVG-UHMS44 and far-end receivers.
Step 7.
Connect a DC 24V power adapter to the AVG-UHMS44.
Note:
IR receivers connected to IR IN& IR ALL IN should have a carrier. If not, send
RS-232 command %0900. or %0901.to activate native carrier mode or force carrier
mode in the IR matrix launched between AVG-UHMS44 and far-end receivers.
4.5. Connection with HD300R
AVG-UHMS44 boasts 4 x HDBaseT output ports capable of supplying power to the
receiver units. Connect the HDBT output ports of AVG-UHMS44 to HDBaseT
Receivers supporting PoC (like HD300R) via twisted pair. Plug a power supply to the
power port of AVG-UHMS44, the HDBaseT Receivers will be also power on via the
POC solution.